Shooting a target from a rest 

Using a rest when shooting a hunting rifle will significantly improve accuracy. A simple rock, fence post, or tree can be used as a shooting rest. Your forearm should not touch the rest. Most states also allow you to shoot with a handgun, but you should be sure to follow proper gun-handling techniques to get the best results. In addition to the right shooting rest, it is important to get the correct grip and stance to ensure you have complete control of the gun. 

(To know more about safari hotels Namibia, visit our website!)

First, make sure your hunting rifle is unloaded. Remember, you don’t want to shoot at a moving target. The rest will keep the rifle steady while you make adjustments. Rest should be firm but not loose. Make sure that your rifle is level, and that you’re not tilting your scope. 

Using a maximum-point-blank zero 

Using a maximum-point-blazer to sight a hunting rifle simplifies aiming, especially at long distances or when the animal is moving. However, the point-blank range of a hunting rifle can vary, depending on the species of animal you’re hunting. 

The maximum-point-blank zero is the same as a zero at 100 yards, except that at the maximum distance, the bullet will strike less than seven-and-a-half inches above the point of aim. This makes it possible to hold the crosshairs in the center of the target at distances up to 200 yards. Moreover, at 300 yards, the point of impact is approximately the same as the point of aim. 

Setting up a hunting rifle 

The first step to successfully shooting a game animal is setting up your hunting rifle. The first step in this process is to set up your rifle so that the optics line up with the bore axis. This is called bore sighting and you should perform it right after mounting your scope. This step is critical to ensuring that you get the most accurate shot possible. 

It is important to select the right rifle for your needs. Rifles that fit poorly can lead to bad shooting habits and increased recoil. For this reason, knowledgeable firearms salespeople will often recommend shouldering your hunting rifle. Also, remember to measure the rifle against your frame. Your clothing will also influence the fit. If you plan to wear a hunting coat, bring along extra layers to ensure that the rifle fits correctly. 

Setting up a 100-yard zero 

You can do a 100-yard zero with a hunting rifle by shooting at a paper bullseye. Before taking your first shot, you should boresight the scope to ensure that the bullet will hit the target at the desired distance. This will help you save ammo if you decide to shoot a target closer to you. 

Once you’ve zeroed your rifle at 100 yards, you can try a few different targets. You may decide to shoot a bull elk, for example. The chest of a bull elk measures 24 inches from top to bottom and contains 16 inches of vital tissue. If you shoot dead center, your bullet will hit the bull’s chest inside a 6-inch circle. This is the same distance that a mid-range bullet will reach. 

Setting up a 25-yard zero 

When setting up a 25-yard zero for your hunting rifle, consider how much further you plan to shoot from the target. Although there are many variables that influence the trajectory of a cartridge at this distance, ballistics programs can provide you with an accurate calculation. If you are shooting more than 100 yards, consider using a 1-inch-low rule of thumb. This will ensure a 100-yard hit on the target almost every time. 

Before zeroing your rifle, it is important to shoot a group of targets at 25 yards. This will help you determine what adjustments you need to make to your scope. You should also use a spotting scope to check if your shot made it onto the target. During the zeroing process, use a bench rest or a stable platform, and make sure you anchor your rifle at two points on the stock.