How to Make a Powerful Hunting Bow 

If you’re interested in making your own bow, there are several different steps to take. The first step is to choose the correct wood. The type of wood used in a bow can determine how long it will last. Wood can be found in the woods or can be purchased at your local hardware store. Once you have the wood, you will need to seal the ends of the wood to prevent moisture from getting into the limbs. You can also apply a coating of spar urethane to help keep the limbs from deflecting and following the string. 

(Searching for “bird hunting“? Visit our website!)

While there are many different types of woods, you can usually find red oak. This type of wood is sturdy and will give you a solid base for your bow. Ash is another good choice. It has a low moisture content, which makes it a suitable choice for beginners. Before you move on, however, you will want to let the green stave dry completely. 

Next, you will need to determine the size of your bow. To do this, you will need to calculate the total length of the limbs. For example, if you plan on building a 28-inch draw bow, you will need to add six inches to the overall length of the limbs. However, if you’re a little more advanced, you may decide to cut the limbs at different lengths, which will give you a wider range of options for the final bow. 

To make the best bow, you will need to choose a strong, sturdy, and smooth tree. The tree should be at least 68 inches long. In the woods, you will want to find trees with the same diameter as the bow. Also, make sure the tree is straight. A straight tree should be around 10-12cm in diameter. 

Finally, you will need a tillering stick and a pair of sharp scissors. With a tillering stick, you can bend the wood of the bow to your liking. This is the most fun part of the whole process. When using the tiller, you should be aware of the different notches on the stick. Each notch is about 5cm in length. These notches are designed to allow the bow to bend evenly. But they should not be too deep or you’ll weaken your bow. 

To complete the bow, you will need a handle and a loop for the string. Your handle should be 4 inches long and 1 1/8 inches wide. You will also need a square tab at the end of the bow. The square tab is a very strong place for the string to loop. 

The string should be a 12-strand fiber. This is the traditional style, but you can also use linen. Be sure to have a proper knot in the middle of the string to secure the string. 

One of the most difficult parts of making a bow is drawing it out. You will need a steady hand and a lot of patience.