How to Mount a Scope to Your Hunting Rifle 

There are many ways to mount a scope to your hunting rifle. But you must choose the best one to ensure that the scope stays level. A well-mounted scope should have the ability to hold its own when subjected to rough treatment. In addition, it must also be able to survive a fall. Some scopes have built-in bubble levels for this very purpose. Lastly, it must have a solid base. 

(Click here to know about us:

To mount a scope to your hunting rifle, you will need the proper tools and some guidance. You must be sure to select the right scope and accessories to ensure that they will perform properly. For example, a scope will require a solid base, a gun cradle, and a couple of screws. Luckily, there are a number of simple and inexpensive kits to help you get the job done. 

Before you begin mounting a scope to your rifle, make sure that it has been properly cleaned. A degreasing agent is recommended to remove any oil or dirt from the receiver or scope. Also, be sure that your rifle is unloaded and placed in a safe place. 

When installing a scope, you should also consider the type of rings you will use. A high ring is better suited for scopes with a 50mm objective diameter, while a medium ring would be ideal for a scope with an objective size of 56mm. On the other hand, a cantilevered ring is a great way to give you more options. 

Having a properly mounted scope on your rifle can mean the difference between a successful hunt and a failed one. It can also save you money and time when it comes to repairs. If you decide to install a scope yourself, keep in mind that you will need a work table, a good quality screwdriver, and a thread locking compound. Moreover, you will need a decent amount of space for your work. And of course, it is a good idea to consult the owner before making any changes. 

The first thing you should do is figure out the best ring for your scope. The ring should be tall enough for the scope’s objective lens, while not butting against the barrel. This will allow you to see a clear view of the scope while it is mounted. However, it can also cause the scope to shift. 

After you have determined the scope ring you want to use, it is a good idea to check the corresponding rail on the scope. These rails come in various types, but the most common are Picatinny and Weaver. You will also need to adjust the spacing of the rails so that your scope rests comfortably against the body of the rifle. 

Finally, it’s a good idea to use a good amount of torque to tighten the screws. You can choose a torque gauge to measure the exact torque that you need. Alternatively, you can simply go by the manufacturer’s recommendation.