How to Set Up a Bow Hunting Stand Properly
If you’re a bow hunter, you’ve probably heard the term “tree stand”. This is an excellent tool for hunters who want a close-range shot at a deer. However, you must know how to set up a tree stand properly in order to get the best results.
(To know more about group travel safari in Namibia, visit our website!)
There are several important points to consider when you’re setting up a tree stand. First, you need to choose a stand that is high enough to draw your bow, but low enough to make a good shot. In addition, you need to be aware of how the wind will affect your stance.
Ideally, your tree stand should be located in a location that offers ample cover. You can find this cover by looking for leaves and branches around your stand. It’s also a good idea to look for large logs or branches that you can use to guide a deer toward the stand. Then, you’ll need to make sure the location is sheltered from the wind, but not so sheltered that the buck won’t be able to see the arrow.
Another thing to look for is an escape route. Depending on your area, you may have to block off trails or cut down trees. For example, a wide river or ditch could keep a deer from escaping. As for your exit route, ideally, it should be on the opposite side of the deer from where you are aiming.
You’ll want to use a safety harness when you’re climbing to your tree stand. This helps you avoid injury if the stand falls over. Also, you need to make sure you’re comfortable when descending and ascending the stand.
While the best option is to simply set up your stand where you have a wide-open field, this isn’t always the easiest thing to do. If you have access to a large open field, you might want to consider building your stand atop a barbed wire fence, so that you can easily escape should the wind blow.
Climbing stands are often the most portable and versatile of all types. They’re also the best choice for hunters who move frequently. Usually, these stands feature a platform and a seat that is separated by a strap. These parts can be pulled up and down a few times to allow for gradual climbing.
The most important part of setting up a tree stand is to locate the best spot. The ideal spot is a location that is both sheltered from the wind and a place where you can get a decent shot. Getting the right location requires a bit of research and some forward thinking. Some things to consider include the amount of cover you have, the direction in which the wind is blowing, and the distance between your stand and your food source.
To ensure that you’re getting the most out of your setup, it’s also a good idea to use a wind blocker. This will prevent the wind from blowing into your bedding area, which can lead to a bad shot.